Made in


  email:   tel. / fax. +44(0) 1902 674444 

SKY PLIER 2    Reach and retrieve to a height of 9.0metres.

Litter Plier BLP1-85A.G1I+ Litter Plier BLP1NC + Adapter + 6-Section telescopic pole + pull cord+ E11extension handle pair + Bag.The pole is made of non-conductive glass-fibre, of 1.8m. closed length - 7.8m. fully extended. Maximum skyward reach with Litter Plier is 9.0m.

Cord Attachment: One end of the yellow 8.0m. cord is passed through the pole-mounted half of the Litter-plier handle then looped through the moving half before being tied back to the pole mounted half of the handle.

 Actuation: Pulling on the cord causes the plier to close, rotating the pole clockwise creates bag-wrap. Back-off with pole to pull clear of tree.

Close pole down to handling height for Litter disengagement.

Litter Plier: BLP1NC-5A.GT2 orange. Configured to spring to the closed position it is designed for use with Extension handles or Sky Plier-2 (shown above).

It is fitted by entering the tapered thread-end of the extension handle into the Litter Plier handle-socket, with a push and clockwise twist action. 

An 8 metre extension cord (not shown here) is tied to the looped end of the plier attached operational-cord that is threaded as shown here.

The grips are opened by pulling strongly on the cord such that the resultant torque exceeds that of the blue-elastic-shock-cord that actions gripper closure. With the open grippers positioned the cord is released, allowing the grips to close and trap the litter.

The overall length of 22” (56cm.) provides the best compromise between grip pressure and open grip aperture. Fully open the gap between the grips is 6” (15cm.)

SCoop ends can be fitted, in place of the .GT grips shown.

Price at £60.00ea. Including extension cord but is +carriage if sold as a discrete item.